E5-OL

Delivery form

• The product is delivered in single units, order x 2 for transfer air installation,

 

Product sizes (WxH, mm)

200-100^*1)
300-100
400-100
500-100
600-100

300-150
400-150
500-150
600-150
900-150^*1)
1000-150^*1)

400-200
500-200
600-200
800-200^*1)
900-200^*1)
1000-200^*1)

600-300
900-300^*1)
1000-300^*1)

600-600^*1)

 

^*1) The dimension cannot be combined with the FLKR commissioning box.

 

 

Accessories

• RAM: Mounting frame for rectangular products.
– Intended for mounting the product without a commissioning box.
– Included in delivery unless specifically excluded when ordering.

 

• OFI-R (ÖFI-R): Fibre blocker for transfer air units that prevents the spread of insulation fibres in air flows.

– Elastic wall penetration sleeve for transfer air units mounted in insulated stud walls that prevents spreading of fibres and particles into the air flow. 

– Does not affect free area or sound performance, unlike sheet-metal wall penetration sleeves.

– Made from environmentally friendly, flexibe and flame-retardant material.

– Complies with current recommendations for OVK inspections.

– Can be combined with the following rectangular transfer units: OLS/ÖLS, SOD[a]/SÖD[a], E5^*2

– Available in circular version, OFI-C (ÖFI-C)

 

^*2) E5 or other rectangular product supplied or ordered in pairs for transfer air purposes, must be within the dimensions W ≤ 800 och H = 50 mm.

 

Sizes OFI-R (ÖFI-R) (mm)
– Supplied in 4 separate parts that is fitted together in rectangular hole cuttings.
– Available in three different widths with a fixed height of 50 mm.

 

Wall depth | Hole cutting (BxH) | Designation

70 mm | W≤300 x H=50 | OFI-R70-300
95 mm | W≤300 x H=50 | OFI-R95-300

70 mm | W≤550 x H=50 | OFI-R70-550
95 mm | W≤550 x H=50 | OFI-R95-550

70 mm | W≤800 x H=50 | OFI-R70-800
95 mm | W≤800 x H=50 | OFI-R95-800

 

 

• FLKR: Commissioning box / plenum for extract air installation.

– Compatible with extract air grilles DR and E5.

Selectable duct connection side:

– Rear connection: FLKR-B
– Side connection: FLKR-S

 

Sizes FLKR^*3) (mm)

For duct dimension | matching grille WxH

Ø125 | 200 x 100

Ø160 | 300 x 100
Ø160 | 400 x 100

Ø200 | 300 x 150 
Ø200 | 500 x 100 
Ø200 | 600 x 100 

Ø250 | 400 x 150 
Ø250 | 400 x 200 
Ø250 | 500 x 150 
Ø250 | 600 x 100 

Ø315 | 500 x 200 
Ø315 | 600 x 200 

Ø400 | 600 x 300 

Ø600 | 600 x 600 

 

^*3) Please contact our sales if you require other sizes than the standard range.

• E5: Eggcrate grille made of aluminium with frame made of hot-dip galvanised steel sheet in white RAL standard colour. Stainless steel clips and sealing gasket from made from polyurethane foam.

• RAM: Mounting frame for rectangular products made of galvanised sheet steel.

• FLKR: Hot-dip galvanised steel sheet, internally insulated with washable surface-coated sound absorber, made from 100% recycled, non-allergenic, hydrophobic PET plastic material.

• OFI-R: Made from environmentally friendly, flame-retardant polyurethane foam. The material is CertiPUR and Oeko-Tex certified.

• E5 has a rectangular connection spigot and is primarily intended for installation in walls or rectangular ducts, but can also be installed in ceilings.

• E5 is installed using mounting frame RAM (accessory) for rectangular products.

• The mounting frame has pre-drilled holes (Ø6 mm) and is secured with screws or pop rivets. The product is attached to the frame with a clip function.

• For transfer air applications, the product is installed in pairs on either side of a wall in a rectangular hole cutting. The end pieces are pressed into the mounting frame.

• When the accessory OFI-R / ÖFI-R is used, the foam parts must be fitted into the hole cutting before installing the grille.